Z1OwnersClub GB

Guys,

I need some help here!!!

I have just about finished my Z1000 Ltd which is being rebuilt back as a Z1000 but i have a problem with the rear brake pedal spring.

the standard listed spring which wraps around the pedal just does not work at all--this is because the brake pedal mounting bracket and spindle is mounted on the footrest hanger A frame bottom tube where as the standard Z1000 bracket is mounted on the main frame diagonal tube--hence the point where the spring starts to produce tension is in a different place and does not work.

Anyone got a solution?????????

or any one got a part number for a Z1000 Ltd spring

all help much appreciated

Regards


Steve

Which model LTD is it Steve??
I've got a parts book for the 1981-1982 Z1000 LTD (K)

London,

Mines a 1978 B2 model

great if you can help

regards

steve

i had this with a kh500 i bought in bits built it all up nothing missing but the rear brake pedal spring didnt fit or work then i realised it fitted from the back of the frame on the pivot arm and not on the pedal like most other triples worth a try

here you go 78 z1000ltd b2




item 22 is part no 43005-041

Thanks for your help lads--problem now solved

It turns out that the KZ1000B2 has a Z900 frame and brake pedal mounting brackets but a pedal only used on the B1/B2 Ltd's different to the A1/A2 series.

flew across to J Browse in Wrexham and got a used one this morning now all will work.

Thanks again

Steve