Page 1 of 1
Engine work
Posted: Wed Jan 14, 2015 9:48 pm
Author: kennytcr
Looking for recommendations for somewhere to get some engine work done.
Re bore and possibly valve seats/guides?
Ideally in the midlands
Thanks
Kenny
Posted: Wed Jan 14, 2015 10:36 pm
Author: z1bman
SEP are very good but not cheap & do all the things you need for a good engine to run sweat. or you could try pj engineering for your re bore but he mainly does 2 strokes but i think he could do a 4 cylinder & is in Wolverhampton I have used him for a rd400 crank rebuild & re bore
http://www.sep-kegworth.co.uk/page1.htm
Posted: Thu Jan 15, 2015 8:50 am
Author: PAULJAC47
As Z1b man says Sep at Kegworth but dont expect an overnight service!
Posted: Thu Jan 15, 2015 10:54 am
Author: 000zeds
Agree with other lads SEP are good
Posted: Fri Jan 16, 2015 9:30 am
Author: kennytcr
Thanks
Will give SEP a call
Kenny
Posted: Fri Jan 16, 2015 9:37 am
Author: london calling
http://www.sep-kegworth.co.uk/page1.htm
If you're going to SEP,then make sure you go to Oaklands Butchers for a cob and a coffee
http://www.oaklandandson.co.uk/