Z1OwnersClub GB

back to these again ,im looking to buy a couple of the filters what go on the long stalk in the fuel tap,ive been on past threads and they are out of stock,anyone know where to get em from and what size.

Hi Keith

This is where I got mine from. Fitted nicely onto my Z1B (original) fuel tap.

Steve

http://www.ebay.co.uk/itm/FUEL-TANK-FIL ... 2eaa282dfa

it looks a bit small ,mines a a4 there carnt be much difference,

keith mayall wrote:back to these again ,im looking to buy a couple of the filters what go on the long stalk in the fuel tap,ive been on past threads and they are out of stock,anyone know where to get em from and what size.

I have been looking for this type of filter for ages as well ? so any help would be great ?

z1bman wrote:http://www.ebay.co.uk/itm/H****-Yamaha-Kawasaki-Suzui-PETROL-FUEL-TAP-FILTER-TUBE-7mm-10mm-/301275246280?pt=UK_Motorcycle_Parts_13&hash=item4625676ec8

Good find ! i have just measured my spare tap, the two copper tubes are 7 mm o.d ,so i think they would fit ? just a bit dear £6 ?
That is on a gpz11 uni-trak ,but i think they are all the same for the big fours ?correct me if i am wrong ?

steve bowdler wrote:http://www.ebay.de/itm/KAWASAKI-Filter-Benzinhahn-im-Tank-1x-Z900A-B-u-Z1000-REPRO-lesen-/271657619251?pt=Motorrad_Kraftradteile&hash=item3f400e4f33

They look right as well !! but need to read it in english ??

snotie1965 wrote:

steve bowdler wrote:http://www.ebay.de/itm/KAWASAKI-Filter-Benzinhahn-im-Tank-1x-Z900A-B-u-Z1000-REPRO-lesen-/271657619251?pt=Motorrad_Kraftradteile&hash=item3f400e4f33

They look right as well !! but need to read it in english ??

Fuel filter for pet-cock, upper positions, fits many KAWASAKI Z1 and Z900A,B


Item nr.: VS44322-Fuel-Filter Please read and note exactly these discribtion!
Dimensions: lower outer diam. 7,5 mm / inner dia. 5,9~6,0 mm / length all over 32,8 mm

Now in stock!!! You won`t find any other item fits your "Z"



Great Repro in OEM-Quality-Production "Made in Japan".

Fits a 100% your bike and keep it saved against

running problems!




*This filter fits your OEM-petcock for Z900A,B model, but not the
reproduction petcock Z900A,B !!




*This filter also fits to your Z1000 reproduction petcock in upper

position; for lower position he is to big.




*I never had any chance to check this filter at the OEM Z1000 petcock;

may be anybody can help with info? Thanks!



Sold each, without petcock!
Attention: What you see (filter only) is what you get !




For any question please email me on:
info@hard-to-find-parts.de

Thanks for looking and always "good riding" on your bike!

Regards from your "hard-to-find-parts"-team!!

thanks lads ive orderd one for the old petcock the new petcock is bigger where do we get ones for them.

I know ones fitted to Atco and other lawnmowers are very simialr have used in the past,also seem to remember some scooters use em!

Cant vouch for anything else but the Z1R tap, But in the past Ive rolled some fine brass gauze into a tube and inserted it into the old carrier with good effect

z1bman wrote:http://www.ebay.co.uk/itm/H****-Yamaha-Kawasaki-Suzui-PETROL-FUEL-TAP-FILTER-TUBE-7mm-10mm-/301275246280?pt=UK_Motorcycle_Parts_13&hash=item4625676ec8

Cheers for the links everyone , i have ordered one of the above tap filters ,and will fit it and up-date when i know it is all o.k ?

snotie1965 wrote:

z1bman wrote:http://www.ebay.co.uk/itm/H****-Yamaha-Kawasaki-Suzui-PETROL-FUEL-TAP-FILTER-TUBE-7mm-10mm-/301275246280?pt=UK_Motorcycle_Parts_13&hash=item4625676ec8

Cheers for the links everyone , i have ordered one of the above tap filters ,and will fit it and up-date when i know it is all o.k ?

put the filter on the tap inside the fuel tank ,and it fitted nice and tight ,so now i have got rid of the in-line fuel filter ,which means now i have a better flow to the carbs .
So the above filters are decent and fit good .

cheers again ,got the filter it fits well now ordered another.