During the winter motor rebuild, I am going to fit a set of cams with a valve lift of .395, duration of 284. Currently the shims are all between 250/260 - what shim sizes do I need to drop down to?
foz
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Shim sizes
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Shim sizes
drink feck arse girls
-
Jeff Saunders
- 100Club
- Posts: 337
- Joined: 18th Nov 2004
- Location: Upstate NY, USA
- Contact:
Unless the base circle of the cam is different (which is shouldn't be), you shouldn't need to change shims. The reality is you might need to tweak the clearance a little as manufacturing tolerances can vary a little between cams.
73 Z1 (turbocharged), a 74 Z1A, and some h***a's and Suzuki's...
www.z1enterprises.com jeff@z1enterprises.com
www.z1enterprises.com jeff@z1enterprises.com
Who is online
Users browsing this forum: No registered users and 18 guests