Page 1 of 1
LED Stop / Tail light
Posted: Sun Oct 26, 2014 8:13 pm
Author: Z1Boy
Has anyone fitted a LED stop tail light bulb to a bike with a brake light failure warning light in the clocks? Not sure if the LED bulb would fool the box into thinking the bulb has blown??
Posted: Sun Oct 26, 2014 8:46 pm
Author: Mark Tiller
I put LEDs in the clocks and it affected the circuit.....had to put a resistor in to fool it.....the company who supplied the LEDs gave me the resistor and a diagram where to put it.
Which bulb are you going to use?
Re: LED Stop / Tail light
Posted: Mon Oct 27, 2014 1:00 pm
Author: Big Fluff
Z1Boy wrote:Has anyone fitted a LED stop tail light bulb to a bike with a brake light failure warning light in the clocks? Not sure if the LED bulb would fool the box into thinking the bulb has blown??
Tried one and thought they were crap!
If you're not directly behind the bike then the light from the LED buld isn't that good at all!
You're best off with a quality (Hella) standard tungsten bulb IMO.
Posted: Mon Oct 27, 2014 10:25 pm
Author: Z1Boy
Thanks lads, that saved me 16 quid..
