Were the original Z1 4 into 4 exhausts of the double skinned type?
It seems like all the current replacements, Doremi etc are only single skinned? Does this mean that you are likely to end up with the header/downpipes discoloring?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1 exhausts
Moderators: KeithZ1R, chrisu, paul doran, Taffus
ZedHead wrote:Best ask the guys who have bought Doremi pipes off me, there are quite a few on here![]()
As already said route cause of bluing is set up.
I agree absolutely.
The single skin headers can help to pinpoint an issue.
Jimmock. 
SPEED IS JUST A QUESTION OF MONEY...HOW FAST DO 'YOU' WANT TO GO?
I hate people I don't like !

SPEED IS JUST A QUESTION OF MONEY...HOW FAST DO 'YOU' WANT TO GO?
I hate people I don't like !
Don't let a garage set up your carbs unless your e there, shut off the engine after a couple of minutes and cool, also tip from the classic car community, flood the internals of the pipes with well used engine oil and drain out surplus. I did both of the above and pipes are perfect. Oil burns off and leaves a protective coat, I also bought .2 tins of heat dispersant paint and emptied them down the headers and let dry before doing the oil. doing nothing will probably result in some form of yellow or bluing , if it doesn't that's good but I wouldn't take the risk
Who is online
Users browsing this forum: No registered users and 20 guests