Page 1 of 1
best quality valve cover gasket
Posted: Sat Sep 06, 2014 3:43 am
Author: PETER KZ1A
Part # 11023-006
The chinese pattern ones are shite
Anybody know a quality replacement
Cheers
Posted: Sat Sep 06, 2014 7:22 am
Author: ZedHead
I sell Vesrah which are very good. Mind if you can afford to live in Perth you can afford genuine
Beautiful city
Posted: Sat Sep 06, 2014 8:28 am
Author: z1bman
genuine kawasaki one 11023-006 is still available but £55
Posted: Sat Sep 06, 2014 9:21 am
Author: ZedHead
z1bman wrote:genuine kawasaki one 11023-006 is still available but £55
Don't tell the mods i told you but .....
http://www.saisei-europe.com/Shop/c/eng ... 000-series
Posted: Sat Sep 06, 2014 10:19 am
Author: PETER KZ1A
mods?
Perth was cheap when we got here
Genuine gasket from Kawasaki is $110
The chinese pattern item is 1.5mm thick, fakkin wafer
Is the saisei item same dimension as genuine
Thanks
Posted: Sat Sep 06, 2014 11:17 am
Author: ZedHead
PETER KZ1A wrote:mods?
Perth was cheap when we got here
Genuine gasket from Kawasaki is $110
The chinese pattern item is 1.5mm thick, fakkin wafer
Is the saisei item same dimension as genuine
Thanks
Moderators Peter but that's another story.
Vesrah are probably a little thicker than your cheapo Chinese ones, maybe 2mm. The important thing is that they will seal and wont fall apart
Posted: Sat Sep 06, 2014 10:20 pm
Author: DogsbolloxofZ1B
I ordered a genuine Camcover gasket recently at £55, the blxxdy thing was Pink! Fortunately it was for someone else
Posted: Sun Sep 07, 2014 12:27 am
Author: z1bman
yes the Kawasaki part is pink now they used to be grey & had lead impregnated in the material which is now banned. the new pink gasket absorbs oil like blotting paper but once it has been tightened down a couple of times they are ok & can be re used many times over
Posted: Sun Sep 07, 2014 3:05 am
Author: PETER KZ1A
bought a genuine off ebay for $60 , see how we go.....
Cheers