Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Carb Hanging

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
DavidZ1R
Custard Cream
Custard Cream
Posts: 792
Joined: 12th Jun 2011
Location: Bolton Lancs

Carb Hanging

#1 PostAuthor: DavidZ1R » Sat Aug 16, 2014 10:53 am

Well now I have finished my KZ550, I have managed to have a few run outs, one problem I have found, when the engine is hot, say 5miles, the carbs hang between gear changes at about 3000 rpm, will fall back when pulling to a stop, will hang again sometimes, not all the time, again when I tweek the throttle, have done the usual checks for air leaks, wd40 method, all seems ok, baffled . :?:
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R

User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#2 PostAuthor: PAULJAC47 » Sat Aug 16, 2014 7:46 pm

Typical head to carb rubbers air leak,are the rubbers new? sometimes they distort against the head or are hard and dont give good seal, could be opening up when get hot...
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 22 guests