Page 1 of 1
gsxr swingarm on z900
Posted: Tue Nov 27, 2007 6:12 pm
Author: kenny z9fighter
got a complete srad gsxr 750 back end on my z900.looks like a good job but the chain rubs constantly on the rubber guide thingy at the top front of the arm.dont know if this is cool,is that the way it runs on the gixer?i've lowered the back end slightly but still contact.it's such a pain in the ass taking on someone elses unfinnished projects!any suggestions?
Posted: Tue Nov 27, 2007 6:36 pm
Author: Pigford
U gonna have to bung some photos on for us to see.
My chain fouls the Left rear engine mount:
You'll probably have to continue to alter ride height to get chain off swingarm. They do drag on it a bit tho, but not continuously, or it'll soon cut through it
My swingarm is a JMC item with a rubber guide & it doesn't rub. Does it still touch when ur sitting on the bike
Posted: Tue Nov 27, 2007 6:42 pm
Author: Rich
Does it rub when you are riding (sitting on) it?
Posted: Tue Nov 27, 2007 7:23 pm
Author: Pigford
Rich, is there an
ECHO in here
Posted: Wed Nov 28, 2007 10:22 am
Author: kenny z9fighter
not shure how to post pics on this,aint drove the bike yet,not got my rear sets sorted yet,there gixer aswell,cant lower it to much,gota underseat exhaust,number plate hangs of it,only rubs of the rubber on the arm but it's soo close to the frame and engine casing,pleeeeaaaze tell me it's worth all this hassle!!!!!!!!!!!!!!!
Posted: Wed Nov 28, 2007 4:53 pm
Author: kenny z9fighter
another prob,my chain is far too tight,needs another link,its a regina x ring 530,anybody?
Posted: Wed Nov 28, 2007 6:05 pm
Author: greenZ
IVE GOT A Z1000 WITH A GSXR SLINGSHOT SWINGARM FITTED,MY CHAIN RUNS OVER BLACK GUARD AT FRONT OF ARM AND CHAIN RUNS CLOSE TO FRAME
Posted: Wed Nov 28, 2007 6:41 pm
Author: Pasc
I had a bog stock Zxr750J a while ago with no mods. The chain rubbed the plastic block that wrapped around the pivot end of the arm. I always thought it didn't look right but after looking at a few other Zxr's they were all the same. I've never looked that closely at the Gixxer setup though.
Posted: Wed Nov 28, 2007 8:06 pm
Author: Rich
Piggy -
Oh yes yes yes yes
Posted: Wed Nov 28, 2007 11:00 pm
Author: kenny z9fighter
should be ok i guess,the rubbers quite thick so the chain is probably a bit away from the pivot anyway,just deed to get a longer chain,pissin me off,all i need is a link extra,looks like i'll need to buy a new one and this ones done zero miles and me being a jock
Posted: Thu Nov 29, 2007 5:28 pm
Author: Pigford
Kenny, I got a spare AFAM 530 ORX link, all sealed in plastic, brand spankers
TORQUE RACING in Frome, Somerset are a great bunch of blokes & once sent me a link GRATIS - F.o.C, and can give advice on fitting etc
Its a proper link that just needs 'burring' over, NOT a split-link
PM ur address & I'll post tomorrow mate
