Page 1 of 1
mystery part
Posted: Sun Jul 06, 2014 11:33 am
Author: gordon62
Hi,
I have a part here, presumably for my KZ1000, it was in with my gear selector parts bin, but for the lights of me, cant think what or if it is from my z1000... it a collet and measured 18mm O.D...X 12MM O.D..X 15MM WIDE..
Posted: Sun Jul 06, 2014 2:21 pm
Author: zed1015
Haven't got one to hand to measure but it's most likely an Overshift bush.
Posted: Sun Jul 06, 2014 3:04 pm
Author: gordon62
That makes sense, that would explain why it is in the gear selector bin, and not a standard part.. I came across this...
Posted: Mon Jul 07, 2014 3:17 pm
Author: gordon62
Cheers ZED1015..Sorted, Fitted and done..
Posted: Mon Jul 07, 2014 4:56 pm
Author: KeithZ1R
My ignorance is showing here, but what does it do exactly please
Posted: Mon Jul 07, 2014 5:22 pm
Author: steve bowdler
Think it stops you accidently changing up two gears , mainly used for drag racing
Posted: Mon Jul 07, 2014 5:37 pm
Author: zed1015
The overshift bush prevents the gear selector arm from jumping off the drum for positive gear changes (avoids missed gears) during aggressive shifts.
It is mostly of use when an air shifter is fitted.
Probably not needed during foot changes but won't do any harm being in there.
Posted: Tue Jul 08, 2014 12:22 pm
Author: KeithZ1R
Thanks Steve and Rob
