Page 1 of 1
Unitrack wiring question.
Posted: Tue Jul 01, 2014 6:31 am
Author: tlc
It would appear I am missing a part from my loom.
I have a red 4 way connector with black/yellow grey and green wires to connect the front indicators.
The indicator connectors are of course the fine bullet type.
So I assume there should be a short loom section between these points.
Does anyone have one for sale or at least a picture of one so I can go looking please.
Posted: Tue Jul 01, 2014 6:39 am
Author: chrisu
If you've got the measurements could you not make one up?
Posted: Tue Jul 01, 2014 8:00 am
Author: Gus
Hi Chris
Is this the bad boy?
Item 26001B
Part number 26001-1520 HARNESS,SUB,FR SIGNAL
Fits these models
ZX1100-A1 (GPz) (1983)
ZX1100-A2 (GPz) (1984)
ZX550-A1 (GPz) (1984)
ZX550-A2 (GPz) (1985)
ZX550-A3 (GPz) (1986)
ZX750-A1 (GPz 750) (1983)
Posted: Tue Jul 01, 2014 10:19 am
Author: tlc
That's the fella Gus.
Tricksy little devil shown as NLA now.
Posted: Tue Jul 01, 2014 2:14 pm
Author: chrisu
chris,
connector from Vehicle wiring products ?
the rest I've got to make one up.
Posted: Tue Jul 01, 2014 3:52 pm
Author: steve.w
i should ave one ..ill try n find it tmmrw
Posted: Tue Jul 01, 2014 5:03 pm
Author: tlc
Thank you Steve. Will wait for your response. Just to be certain it is a red 4 way connector with only 3 wires used. Grey, green and black/yellow terminating in female micro bullet connectors.
Chris I could also make something but I've never seen the micro bullet connectors available.
Posted: Tue Jul 01, 2014 5:46 pm
Author: chrisu
Posted: Tue Jul 01, 2014 6:57 pm
Author: tlc
No Chris. Actually I may be able to do something with this.
http://www.ebay.co.uk/itm/281317392642
Posted: Tue Jul 01, 2014 8:59 pm
Author: z1bman
http://www.ebay.co.uk/itm/OEM-87-09-KAW ... h=item20e4
part no 26001-1859 cradley kawasaki have one in stock £20
Posted: Tue Jul 01, 2014 10:16 pm
Author: snotie1965
I have a spare old tatty loom ,if you want i could cut that connector off (with long tails) ?
just let me know if you still need it ?
Posted: Tue Jul 01, 2014 10:28 pm
Author: z1bman
i think he has the male connector which is part of the loom he is after the short bit of wiring that connects to the connector block
Posted: Wed Jul 02, 2014 6:04 am
Author: tlc
Superb Z1bman thank you.
Part ordered.