Page 1 of 1
Z1000 frame
Posted: Fri Jun 13, 2014 5:20 pm
Author: Pinhead
Hi
Did the early z1000 1978 have the same frames as the z900
ie not with the solid exhaust hanger
Thanks
Pin
Posted: Fri Jun 13, 2014 6:15 pm
Author: Keefleaf
Don't think so.
I've cut off the solid hangers and replaced with z1
type hanger.
Posted: Fri Jun 13, 2014 9:09 pm
Author: z1bman
z1/ z1a z1b z900a4 same exhaust mounting at the rea z1000 a1/a2 solid v shape hanger
Posted: Fri Jun 13, 2014 9:49 pm
Author: garyd
I think the a2 had similar to the Z900
Posted: Fri Jun 13, 2014 9:53 pm
Author: z1bman
garyd wrote:I think the a2 had similar to the Z900
don't you mean the mk11 ?
Posted: Fri Jun 13, 2014 11:59 pm
Author: Jay1969
The B1 and B2 LTD model ('77 and '78 respectively) have tubular rear hangers that resemble the Z1 thru Z900 A4,
but whether the Z1 thru A4 exhausts would be same position for bolting to is another matter.
If no-one else posts photos and measurements before me, I'll post
piccies and measurements later on today.
Posted: Sat Jun 14, 2014 5:23 am
Author: z1bman
as stated in this add from z power the exhaust will fit all 900 models fro 72-76. they will fit the z1000 but a bracket or modification to the existing hanger will be required
https://www.z-power.co.uk/merchantmanag ... cts_id=354
Posted: Sat Jun 14, 2014 9:22 pm
Author: garyd
z1bman wrote:garyd wrote:I think the a2 had similar to the Z900
don't you mean the mk11 ?
To be honest, I don't know what I mean.......Think I'd better leave it to the peeps who really know.