Page 1 of 1
Ramair filter 'cut n shut'
Posted: Sat May 31, 2014 9:12 am
Author: mike_p
Anyone done a 'cut n shut' on a ramair foam filter ? Just wondering what glue to use as I'm thinking superglue might just melt the foam.....anyone done this successfully ? I'm struggling for space and the standard filters just don't come short enough
Posted: Sat May 31, 2014 9:54 am
Author: Jay1969
Off the top of my head, I would suggest something like
Araldite, the resin based sort of stuff. See what the other guys advise...
Posted: Sat May 31, 2014 5:28 pm
Author: Pigford
I've got RAMAIR filters on me Harris - they're flexible so fit in any space...?
Posted: Sun Jun 01, 2014 9:18 am
Author: nw66
Yeah i had some on my drag bike you can squeeze them just about into any space
Posted: Sun Jun 01, 2014 6:38 pm
Author: DavidZ1R
Phew it wasn't a spelling mistake
Posted: Sun Jun 01, 2014 7:30 pm
Author: mike_p
Cheers folks.....I used Araldite and it worked a treat. Problem was its a side draught carb and the inlet is very tight to the frame. You can see it clearly from the outside of the bike and it looked shi* with the filter all squashed up.....Looks ferking great now though
Posted: Sun Jun 01, 2014 8:47 pm
Author: nw66