Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

horns

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
jez1100r
Regular Poster
Posts: 73
Joined: 12th Nov 2013

horns

#1 PostAuthor: jez1100r » Sat May 03, 2014 3:22 pm

both wiers to the horns are live on my z1100r when you press the switch no sound . when you press the switch shoud it earth one of the wires .
both horns work tested direct to the battery

User avatar
Charlie
Custard Cream
Custard Cream
Posts: 773
Joined: 11th Jun 2011
Location: Sheffield
Contact:

#2 PostAuthor: Charlie » Sat May 03, 2014 3:43 pm

Yes, it should earth through the handlebar switch/handlebar. It'll only work when the switch is bolted up.
Why do I persist in debating with idiots ? I really should know better :)

jez1100r
Regular Poster
Posts: 73
Joined: 12th Nov 2013

#3 PostAuthor: jez1100r » Sat May 03, 2014 5:03 pm

so why does the headlight flash when not bolted up .i guess it works the same way as the horn

User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#4 PostAuthor: z1bman » Sat May 03, 2014 5:16 pm

it should work with the switch open the horn button has one earth in=black/yellow & one to the horns = black when the horn button is pressed these two wire are shorted

jez1100r
Regular Poster
Posts: 73
Joined: 12th Nov 2013

#5 PostAuthor: jez1100r » Sat May 03, 2014 7:07 pm

there is a black /white and brown wire going to the horns

User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#6 PostAuthor: z1bman » Sat May 03, 2014 8:08 pm

the brown is permanently live when the ignition is switched on. the black & white is the earth from the switch when the horn button is pressed

jez1100r
Regular Poster
Posts: 73
Joined: 12th Nov 2013

#7 PostAuthor: jez1100r » Sun May 04, 2014 10:37 am

if i put a seperate live/earth to the brown - black/ white the horn work so that says to me the switch is faulty but i have tryed anther rocker switch on the 2 wires and the horns do not work .if you put one of the wiers from the rocker switch on the brown then on the red and black the horns will work when you operate the rocker switch .

User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#8 PostAuthor: z1bman » Sun May 04, 2014 11:41 am

what happens when you short the two wires that go to the horn button? horn button is the most likely cause bad contact on the button is quite common

jez1100r
Regular Poster
Posts: 73
Joined: 12th Nov 2013

#9 PostAuthor: jez1100r » Tue May 06, 2014 6:45 pm

nothing happens when you short the wires .

User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#10 PostAuthor: z1bman » Tue May 06, 2014 9:54 pm

if nothing happens when you short these two wires you must have a break or bad connection in one of these wires


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 18 guests