Z1OwnersClub GB

Anyone have any photos of the internals of a US left light switch date stamped
2 9
I think my internals may be incorrect as the high / low/ pa are all over the place.
Thanks

Nick,
I have z1000 ltd 1978 left hand switch - Would this be any good ?
Stu

US didn't have the "Pa" on the Z1's, at least not an operating one. They were blanked off with a metal tab.
Euro version here

and another thread here
http://www.z1ownersclub.co.uk/forum/viewtopic.php?t=25342&highlight=

which type of switch have you got? the usa switch.

this one does not have the pass button

http://www.ebay.com/itm/Kawasaki-Handle ... 3f&vxp=mtr



early type with no pass facility

http://www.ebay.com/itm/Kawasaki-Z1-197 ... 7675.l2557

later type with pass button

http://www.ebay.com/itm/KAWASAKI-Z1-KZ9 ... 1375265837

Mine is a early switch with just the horn button and the pa blanked with a plate
and no brown wire in the switch.
For some reason the wiring all seems ok but I think the switch may have the wrong contact plate or even the contact switch part fitted as they do not seem to line up correctly and the H L Pa light the lights in the wrong order.
I think a may have a bitsa switch.
Would just like to compare with some photo id or does anyone in the club repair switches.

if the pass switch is not used why don't you just swop over the headlight feed wires at the headlight connector?


i know the contact plate & the headlight switch are different on the european models