Z1OwnersClub GB

I've got an issue with my front master cylinder on my Z1000A2. It's weeping fluid from the reservoir. I think I can sort out the leak on the bottom of the reservoir by replacing the rubber o ring. How can stop the rubber seal on the top from weeping?

This could be what you want,

https://www.z-power.co.uk/merchantmanag ... cts_id=608

Unfortunately mine is the triangular type.....can't find one for love or money

this works out to about £16 in uk money


http://kbmcshop.dk/produkter/31-kawasak ... z1000-mfl/

Z1bman thanks very much.....just need to try and understand how to place an order in German......and are you sure that it's about £16......148 marks converts to £62......where am i going wrong in the conversion?

Try Danish Krone

yes it is in danish krone works out to £16.30

scott wrote:Z1bman thanks very much.....just need to try and understand how to place an order in German......and are you sure that it's about £16......148 marks converts to £62......where am i going wrong in the conversion?

Are the Germans still using the Mark then Scott

I should have realised that DKK is Danish Krone and DK is deuschmark. Thanks for putting me on to that diaphragm......it only came to £21 delivered.....very happy bunny now....can finally sort out that annoying weep. Thanks.

F*ck knows Steve.....probably the euro now.....i'm so out of touch

The master cylinder rubber arrived. NOS, as described. Z1bman, thanks so much for putting me onto that, greatly appreciated.