Page 1 of 1
Bearings for CMA wheels
Posted: Wed Feb 26, 2014 8:01 pm
Author: Fred the Zed
Hi
I have a set of CMAs for my Z1R, that need refurbishing. I'll change the bearings and dust seal(s) as part of the process for reliability's sake, but I'm unsure of the sizes. Anyone done this before who can recommend a supplier?
Fred
Posted: Wed Feb 26, 2014 8:15 pm
Author: hillbilly
there should be numbers on the edge of bearings.
Posted: Wed Feb 26, 2014 9:28 pm
Author: andyb1962
If no's not visible measure
OD ID and thickness then look it up on a bearing comparison site
I have a book if ya get stuck I'll look it up at work and give you the skf equivalent bearing Generally your better off with sealed type
Posted: Wed Feb 26, 2014 10:22 pm
Author: neilbarrett
or take the old bearings to the supplier
Posted: Wed Feb 26, 2014 10:23 pm
Author: Al
I get all mine from here but then it is local.
They also supply bearings by application ie. for a given bike so may be worth a call.
http://shop.marksman-ind.com/on-road-mo ... -871-c.asp
AL
Posted: Thu Feb 27, 2014 9:24 am
Author: martinz1000r
i got mine off ebay. Go for quality though! If you cant see the size on the bearing then measure outer diameter, inner diameter and width. I have CMA wheels so will try and find the receipt for all the bearings and get the sizes off that.
simply bearings
Posted: Thu Feb 27, 2014 10:11 am
Author: KWACKERZ1
http://simplybearings.co.uk/shop/
You can pick how much you want to spend and search by sizes, quick turnaround as well.
Posted: Thu Feb 27, 2014 7:12 pm
Author: Fred the Zed
All good advice!
Cheers fellas
All the best
Fred