Page 1 of 2
gpz1100 ut
Posted: Sat Feb 15, 2014 3:05 pm
Author: snotie1965
I have just got the standard paint work back on my unitrak (tank warning light console) , how do i go about fitting the battery warning wire ? could a buy the part that goes into the battery ? and also where on the loom is the wire located,and what colour is the wire ? I do not want to strip back to much of the tidy loom to find it ?
Any help would be appreciated ,Andy ......
Posted: Sat Feb 15, 2014 3:18 pm
Author: Ginger Bear
The wire is pink & exits the loom very close to the battery. If you connect it to +12v it will stop the warning light flashing.
It was also possible to buy the sensor that replaces one of the battery caps when I did mine, but that was probably around 4 years ago now.
Posted: Sat Feb 15, 2014 4:36 pm
Author: garyd
saw one on ebay in the last few days...so they are still available.
Posted: Sun Feb 16, 2014 12:13 am
Author: johnA
you can still get them from cradley kawasaki and i think wemoto might have them also.
hope this helps john
Posted: Mon Feb 17, 2014 12:17 pm
Author: snotie1965
Cheers for the advice lads ,
I cant find one on "Wemoto" or "evilbay" so i will ring "cradley Heath"
Thanks for your help .
Posted: Mon Feb 17, 2014 12:53 pm
Author: Gus
Posted: Mon Feb 17, 2014 12:53 pm
Author: Ginger Bear
Posted: Mon Feb 17, 2014 1:18 pm
Author: Gus
Hi Steve.
Are you well?
I thought the part number 26012-1053 from Kawasaki.com.
http://www.wemoto.com/parts/picture/hl-705500/
Any good?
Posted: Mon Feb 17, 2014 1:23 pm
Author: Ginger Bear
Hi Gus, I am well, thank you.
This is what I got from Kawasaki.com;
https://www.kawasakiepc.com/PartInfoDet ... 27010-1177
Googling the part No. seems to support the fact that it's correct.
Posted: Mon Feb 17, 2014 2:34 pm
Author: Gus
Hmmmmm.
I'm Jimmocked
https://www.kawasakiepc.com/PartInfoDet ... 26012-1053
I think this must be a battery with a built in sensor
Cheers
Posted: Mon Feb 17, 2014 2:42 pm
Author: snotie1965
That looks like it will do ? the original bit is way to much money !! otherwise i will connect up to live feed and forget about it ?
thanks again lads for your help .....
Posted: Mon Feb 17, 2014 8:49 pm
Author: steve bowdler
Posted: Tue Feb 18, 2014 11:18 am
Author: snotie1965
That looks like it will do ? has anyone used this type before ? if not i will go for the original kwak one £18 seems a fairish price ?
Posted: Tue Feb 18, 2014 12:48 pm
Author: Ginger Bear
I have the genuine item for that price. I had a box of spares that contained a pattern sensor & it just didn't fit properly.
Posted: Tue Feb 18, 2014 1:08 pm
Author: snotie1965
Ginger Bear wrote:I have the genuine item for that price. I had a box of spares that contained a pattern sensor & it just didn't fit properly.
Cheers mate , that is what i will do then ! like you say "it will fit properly"
Thanks Andy .........