would these fit
Posted: Sun Jan 26, 2014 9:18 am
i think you'd need the wheel/spindle etc to go with that given where the spindle fits - i.e. not at the bottom of the forks.
happy to be proved wrong though................
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://rtest.z1ownersclub.co.uk/phpBB3/
would these fit
http://rtest.z1ownersclub.co.uk/phpBB3/viewtopic.php?f=4&t=29236
Page 1 of 1
Posted: Sun Jan 26, 2014 9:25 am
Posted: Sun Jan 26, 2014 10:26 am
If they're the same as the z1000 ltd forks the speedo sensor is electronic so indeed you may need to check the front wheel compatibility. I thought it was just the ltd's with the leading axle, if so they'll likely be longer as well.
Posted: Sun Feb 23, 2014 4:57 am
Youd be better off with the older style kz650 forks that look like your 900 forks.
I use the fork tubes from the 650 which are around 3/4" shorter with the 900/1000 lowers,that way the 900/1000 brakes can be retained.
I use the fork tubes from the 650 which are around 3/4" shorter with the 900/1000 lowers,that way the 900/1000 brakes can be retained.