Page 1 of 1
Carb Identification
Posted: Mon Oct 14, 2013 4:07 pm
Author: freddyz1r
Posted: Mon Oct 14, 2013 5:36 pm
Author: z1bman
26mm possibly z1000a import
28 mm z1000 st / mk11 but no 3 carb has been changed + is a no 1 cylinder carb. mixture screw on no 3 carb should be on the right side not the left
Posted: Mon Oct 14, 2013 6:53 pm
Author: zed1015
26mm is 1000A
28mm is z1r /mk2 but could also be GS1000 (they had 26 or 28 and those plain alloy outer fuel gallery connectors)
Posted: Mon Oct 14, 2013 6:59 pm
Author: chrisu
26mm look like 900A4.
28mm look like Z1R
Posted: Mon Oct 14, 2013 7:25 pm
Author: freddyz1r
Thanks for your replys gents
Chrisu , i didn,t think the 900 had an adjuster screw in the bowl.?
Are the carbs interchangeable, i.e. will these 28mm work fine on my z1r d1 ?
I cant see any reason why not.
Posted: Mon Oct 14, 2013 8:47 pm
Author: z1bman
shouldn't see why not
Posted: Mon Oct 14, 2013 9:35 pm
Author: zed1015
28's should be on the Z1R as std.
Posted: Tue Oct 15, 2013 6:01 am
Author: chrisu
freddyz1r wrote:Thanks for your replys gents
Chrisu , i didn,t think the 900 had an adjuster screw in the bowl.?
Are the carbs interchangeable, i.e. will these 28mm work fine on my z1r d1 ?
I cant see any reason why not.
you're right - teach me to not look at the photos properly.........
Posted: Tue Oct 15, 2013 9:54 pm
Author: z1000puddin
Check out Old wiredgeorges site. THE Mikuni carb GURU
Stu
http://www.wgcarbs.com/index.php/using- ... 92-z1-carb
