Page 1 of 2
Posted: Wed Jun 28, 2006 7:10 pm
Author: Plumba 54
i want to bypass the side stand cut out switch, there are 4 wires, 2 black, 1 green/white and 1 blue/white. Which ones will have to be joined to enable this,or am i way off track?
Posted: Wed Jun 28, 2006 7:13 pm
Author: Pigford
What bike is it for..... My Gixxer had one of them, I just removed it and it was OK... It must have just earthed the ignition low tension side?
Posted: Wed Jun 28, 2006 7:17 pm
Author: Plumba 54
Z1000R2, or at least it will be when i put all the bits back together. I cut the wires behind the side panel as the switch wouldnt go through the hole in the foot peg holder.Tried to start the bike + nothing,joined the wires together again and it fired up ok.Could just shorten the wires and rejoin them and just leave the switch behind the side panel but its untidy so i would like to bypass it.
Posted: Thu Jun 29, 2006 9:39 pm
Author: Plumba 54
dont anybody know?
Posted: Thu Jun 29, 2006 10:33 pm
Author: chrisNI
Mine doesn't have one. At all. I'll take a look at the wiring diagram tomorrow and try and see what's not there.
Posted: Fri Jun 30, 2006 2:07 am
Author: Ed Z1-R
i believe the 2 black wires would be joined together.The clutch lock out switch on a kwaks are just 2 black wires to a switch remove switch join 2 blacks...hey presto! so would imagine it would be the same as...but,perusal of a W.D. would confirm,hence.Bugger i know about the other 2 wires need W.D.
Posted: Fri Jun 30, 2006 4:18 pm
Author: Rich
Just do a conductivity test on the switch. A battery and a bulb will do if you don't have a multimeter.
Posted: Fri Jun 30, 2006 8:25 pm
Author: Plumba 54
Thanks to all, will have a play Saturday.If the powder coaters get their fingers out i might even be able to ride it to Mallory
Posted: Fri Jun 30, 2006 8:26 pm
Author: Pigford
Pumba 54... just cut the bloody stand off!!!!
Posted: Fri Jun 30, 2006 8:33 pm
Author: Plumba 54
would do but you cant always find convenient trees to lean your bike against and car drivers get the cob on when they find your bike resting on their cars
Posted: Sun Jul 02, 2006 8:18 pm
Author: Plumba 54
the 2 black ones its is, cheers to all
Posted: Tue Jul 11, 2006 8:46 pm
Author: Plumba 54
logging in
Posted: Tue Jul 11, 2006 9:20 pm
Author: Big John
Dale is the Z1000R up and running now?
Posted: Tue Jul 11, 2006 9:32 pm
Author: Plumba 54
Sunday barring any further unforseen problems (keeping everything crossed)
Any luck with the side panel?
Posted: Thu Jul 13, 2006 8:06 pm
Author: Big John
No luck with a side panel yet but it looks like Chris has a badge.