Page 1 of 1
Harris Magnum 2 rear sub-frame
Posted: Tue Aug 27, 2013 4:30 pm
Author: martinz1000r
Can anyone that has an un-molested Harris post up a few pictures of what the rear subframe and fittings should look like?
I just tried to fit the standard bodywork to mine and it dont fit. I suspect that some form of surgery has taken place to accommodate the ghastly race seat it currently sports.
Posted: Tue Aug 27, 2013 5:13 pm
Author: Padders
Posted: Tue Aug 27, 2013 5:23 pm
Author: martinz1000r
perfect! Yes mine has been bent upwards and some new brackets welded on to give a mounting for a battery box and the new seat. Out with the angle grinder I guess!
Where does the battery go btw?
Posted: Tue Aug 27, 2013 5:30 pm
Author: Padders
The battery sits in the rear of the seat unit will see if I have a picture if not will take one later tonight.
Remember to post some pictures of your bike.
Posted: Tue Aug 27, 2013 5:37 pm
Author: martinz1000r
Padders wrote:The battery sits in the rear of the seat unit will see if I have a picture if not will take one later tonight.
Remember to post some pictures of your bike.
It's a Suzuki! I'll be barred from the forum for being disloyal......
Posted: Tue Aug 27, 2013 5:43 pm
Author: Padders
Nah we need people on the site that have varied tastes so no worries be boring if the only bikes we liked were just zeds
Posted: Tue Aug 27, 2013 7:20 pm
Author: martinz1000r
Magnum and 1100 Slabbie with my GPz....
Posted: Tue Aug 27, 2013 8:49 pm
Author: Padders
Nice trio you have there Martin are you sure your frame is not a mag 1. Just asking as that was angled up higher at the back.
Here are a couple taken of the rear battery compartment. One with the cover on and one off. Let me know if you need any further information.
Posted: Tue Aug 27, 2013 9:18 pm
Author: KWACKERZ1
Martin's looks like its got a mag2 tank and without looking closely at the headstock its difficult to tell Mag1 or 2.
There are some pictures of Mag one frames bare in a couple of my project threads, but Martin if you need some I could get some for you.
Posted: Tue Aug 27, 2013 9:50 pm
Author: Jay1969
Hiya, what is the rear suspension like with the
shock absorber positioned like that, compared to the ride on a
'conventional' ride?
Posted: Wed Aug 28, 2013 8:42 am
Author: HowieD
Mine arrived from Harris like this; two threaded Bungs in the end of the Tubes, no other bracktes welded on:
Harris supplied this battery box too but I had to butcher it to fit:
hope this helps
Regards
H
Posted: Sun Sep 22, 2013 1:08 pm
Author: PETER KZ1A
GSX11 magnum wooo what a beaut
Posted: Sun Sep 22, 2013 1:11 pm
Author: PETER KZ1A
I had a GPZ 11 mag 2 flogged it when we moved faaaaak
Posted: Mon Sep 23, 2013 6:08 pm
Author: Pigford
