Page 1 of 1
M6 bolt snapped
Posted: Thu Jul 25, 2013 5:16 pm
Author: captaincaveman
Just snapped an m6x126mm(from what i can work out) bolt, its the second to longest bolt for the casing over front sproket on a B1, any ideas where to get one from? are they high tensile or anything special?
Cheers
Posted: Thu Jul 25, 2013 7:53 pm
Author: ADRIAN H
What type of head are you after, (IE Allen head or hex head) ? I have noticed in the past this bolt.
Custom fasteners do Allen head bolt kits -
http://www.custom-fasteners.co.uk/acata ... _Kits.html
Posted: Thu Jul 25, 2013 8:44 pm
Author: z1bman
THIS IS LISTED AS AN ALTERNATIVE PART NO AS THE ORIGINAL ALLEN BOLT IS NLA
112BA06125 CRADLEY KAWASAKI HAVE THEM IN STOCK £3.16
Posted: Fri Jul 26, 2013 6:00 am
Author: jphaynes669
Hi , I take it you have the broke bolt out? The one you need is about 80 mm long , I have some, in stainless with allen head, send me a pm if you need one .
Posted: Fri Jul 26, 2013 7:17 am
Author: doebag
B1 models were hex head bolts, B2 models were socket head.[ according to parts book]
The number Z1Bman gives indicates it is a M6 bolt, 125 mm long
Posted: Fri Jul 26, 2013 9:08 am
Author: captaincaveman
Cheers for the replys, yeah i got it out, luckily it left a nub that i could gently tap round with a hammer and driver, its definetely around 126 so must be the 125mm one, its a hex head, i think they call them thru bolts?
Posted: Fri Jul 26, 2013 10:00 am
Author: z1bman
bolt part no 112BA06125 is a hexagon bolt
Posted: Fri Jul 26, 2013 12:52 pm
Author: captaincaveman
cheers, found it on there
i just looked at there site at other bits, seems they only go back as far as 1983?
Posted: Fri Aug 02, 2013 10:06 am
Author: captaincaveman
All sorted, Cheers Jeff, good to meet ya