Just converting my A4 brakes back to standard, fitted the brake splitter, came to fit the front brake light relay and it does not seem to want to locate correctly in the splitter.
I don't want to rip the threads or over-tighten it, but it is a long way from sitting flush. Can anyone please provide advice on how it should fit, or better still a piccy ??
Cheers
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
A4 Front Brake Switch Fitting
Moderators: KeithZ1R, chrisu, paul doran, Taffus
A4 Front Brake Switch Fitting
"Better to remain silent and be thought an idiot, than to open your mouth and remove any doubt" - Abraham Lincoln
Z900 A4 / KZ1300A1 / H1F 500 Project / CBX Project / RD350 project / GT750A Kettle / BMW R NineT
Z900 A4 / KZ1300A1 / H1F 500 Project / CBX Project / RD350 project / GT750A Kettle / BMW R NineT
Who is online
Users browsing this forum: No registered users and 25 guests