Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

speedo & rev clock - replacing or fixing

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
jacojazz

#1 PostAuthor: jacojazz » Wed Jul 05, 2006 3:02 pm

hi i have a z1000j2 the one with the sensor speedo etc which is playing up as it will not go pass 40 mph & the needle jumps up & down I have replaced the sensor & clocks which were used but still have the same problem Can anybody help me with this problem or can they advise me on a after market system as i have seen one or two where i would have to drill ahole in the brake disk for a magnet to be fitted is this safe? sorry to go a bit but i am getting stuck on this Many Thanks for any help ( i need it ! )
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#2 PostAuthor: Rich » Thu Jul 06, 2006 5:21 am

You don't have to take the feed from the front wheel, you could take it from the rear and mount the magnet on the sprocket/cushdrive for aftermarket ones.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 12 guests