Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Early Z1a Carbs

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
ac/dc
100Club
100Club
Posts: 334
Joined: 17th Apr 2009
Location: berkshire

Early Z1a Carbs

#1 PostAuthor: ac/dc » Wed May 01, 2013 6:19 pm

Has any one put a decent thread with pics about raising or lowering the needle in the carbs,have searched but not found to much
Any help please

malc
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#2 PostAuthor: z1bman » Wed May 01, 2013 6:45 pm

IT SHOWS HOW TO DO IT IN THE WORKSHOP MANUAL
Top
User avatar
Taffus
Moderator
Posts: 4159
Joined: 30th Aug 2007
Location: .21 club

#3 PostAuthor: Taffus » Wed May 01, 2013 8:14 pm

Wired George he's helpful :wink: [url]
(\__/)
(='.'=)
(")_(")Image
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#4 PostAuthor: Garn 1 » Wed May 01, 2013 8:31 pm

The difficult part is removing the two philip head screws from under the slide to expose the circlip that locks in the needle position.
Can't find a decent thread on this procedure... Agree with others ... workshop manual or WiredGeorge.
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
User avatar
ac/dc
100Club
100Club
Posts: 334
Joined: 17th Apr 2009
Location: berkshire

carbs

#5 PostAuthor: ac/dc » Wed May 01, 2013 10:53 pm

Does any one in the uk do a similar service to wired george

Thanks
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#6 PostAuthor: Garn 1 » Thu May 02, 2013 6:25 am

Malc, have a look at <http://www.vintagebikeforum.org/>.
This is run by Wired George and he answers most questions.
You will probably find an expert in UK, however, it's good to find out a bit before you go to the carb mechanic.
RegardZ
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 20 guests