Wellseal
Posted: Thu Mar 21, 2013 8:21 am
is it worth using the above on base and head gaskets on my elr?
thanks
thanks
weaver wrote:is it worth using the above on base and head gaskets on my elr?
thanks
Loctite 3020 is better.
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://rtest.z1ownersclub.co.uk/phpBB3/
Wellseal
http://rtest.z1ownersclub.co.uk/phpBB3/viewtopic.php?f=4&t=24633
Page 1 of 1
Re: Wellseal
Posted: Thu Mar 21, 2013 3:51 pm
Loctite 3020 is better.
Posted: Thu Mar 21, 2013 6:34 pm
What kind of gaskets ?
You need the loctite for copper but not on on the ordinary fibre/paper type where a bit of sealer front and back of the camchain tunnel and around the cam end plugs is all that should be needed.
You need the loctite for copper but not on on the ordinary fibre/paper type where a bit of sealer front and back of the camchain tunnel and around the cam end plugs is all that should be needed.
Posted: Thu Mar 21, 2013 7:01 pm
just the standard gaskets,cheers
Posted: Thu Mar 21, 2013 9:03 pm
On base gaskets i grease both sides (no sealer).
This helps the the gasket settle evenly when being tightened,makes for easier removal at a later date and helps prevent oil seepage and the wick effect by sealing the surface.
This helps the the gasket settle evenly when being tightened,makes for easier removal at a later date and helps prevent oil seepage and the wick effect by sealing the surface.
Posted: Thu Mar 21, 2013 9:32 pm
thanks for the info 