Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Is this good for my bike?

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
maak
Regular Poster
Posts: 39
Joined: 2nd Mar 2013
Location: northampton

Is this good for my bike?

#1 PostAuthor: maak » Mon Mar 18, 2013 1:21 pm

Would the GPZ Uni-Track's speedo fit my KZ700?Here is a link http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... TQ:GB:1123

Are the plugs the same?Would like to fit that speedo as I really like it but I'm a bit afraid I have to modify it..and my lights doesn't work without the dash..
Sorry guyz for my annoying questions :|
Top
User avatar
jimmock
Hardcore
Hardcore
Posts: 8947
Joined: 1st Dec 2009
Location: Central Scotland, near Zedinburgh.

#2 PostAuthor: jimmock » Mon Mar 18, 2013 1:40 pm

Maak,

Dont worry about your annoying questions.

Being the clubs "in house agony uncle", I've had worse questions to deal with!!!
Jimmock. :wnkr


SPEED IS JUST A QUESTION OF MONEY...HOW FAST DO 'YOU' WANT TO GO?

I hate people I don't like !
Top
User avatar
maak
Regular Poster
Posts: 39
Joined: 2nd Mar 2013
Location: northampton

#3 PostAuthor: maak » Mon Mar 18, 2013 2:08 pm

Thanks Jimmock!Hate to just ask and ask and ask again and not being able to help.Always use google and ebay and some other sites first but sometimes just can't find what I'm looking for.Brass is short and can't buy everything just to try if fits or not.No brakers around northampton and bike shops don't keep things on their shelves what I'm after so I have to ask you guys.Thank you for your help,I really really appreciate it.Hope bike will pass MOT and will be able to go to meet you lot and buy some beers,teas :lol: :lol:
Top
User avatar
KeithZ1R
Moderator
Posts: 3368
Joined: 15th May 2005
Location: Bury

#4 PostAuthor: KeithZ1R » Mon Mar 18, 2013 3:04 pm

Sadly Maak it looks like the clocks were bike specific listed as KZ700A1 and KZ700A1L unless somebody knows better :cry:
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#5 PostAuthor: Ginger Bear » Mon Mar 18, 2013 5:34 pm

I'm sure they could be 'made' to fit. Speedo is cable driven, so that part will be easy & I think the rev counter is connected to the low voltage side of the coils.
I wouldn't have thought they'll be 'plug & play' but with some re-wiring they should work fine.
Image

# 104

Phil Churchett Award Winner 2011 & 2016 :D
Buzzworkz Best Modified Zed 2016
Top
User avatar
chrisNI
Site Admin
Posts: 2316
Joined: 22nd Dec 2001
Location: NI

#6 PostAuthor: chrisNI » Tue Mar 19, 2013 9:29 am

My 1000R had a set of those on it when I got it, the guy had bodged it to fit and they worked okay, but I put the standard clocks back on. So as GB says they can probably be made to work, they'll have most of or all the same electrical wiring, just probably not the same plugs.
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#7 PostAuthor: zed1015 » Tue Mar 19, 2013 9:50 am

They won't work without some re-wiring.
As your lights only work with the original clocks connected you will need to identify that part of the circuit in the main loom and bypass it so it doesn't run through the clocks.
It shouldn't be that difficult as it should only be a main power feed from the ignition to the lighting switch.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests