wheel spindle
Posted: Sat Mar 16, 2013 9:36 pm
Author: greenZ
any ideas how to move rear wheel spindle that is locked solid,wheel nut is off but spindle will not knock out
Re: wheel spindle
Posted: Sat Mar 16, 2013 9:45 pm
Author: Jay1969
greenZ wrote:any ideas how to move rear wheel spindle that is locked solid,wheel nut is off but spindle will not knock out
ACF-50 is probably the best stuff for that, soak it both ends overnight, then try and drift the spindle out after that...
Cheapest price on the net >>>
http://www.ebay.co.uk/itm/280774068482? ... 1438.l2648
Posted: Sun Mar 17, 2013 12:43 am
Author: zmaxmotorsports
Will the axle spin with the nut removed?
Posted: Sun Mar 17, 2013 2:02 pm
Author: PAULJAC47
Sound like spindle is seized in bearings,get the wheel off and use to blocks of wood to support underneath,get some plus gas or similar and soak,heat may also help,put nut on to protect thread,use copper hammer to persuade the spindle, Good luck..would change the bearings after this treatment!!