Page 1 of 1
z1000 ltd seat dimensions
Posted: Thu Mar 14, 2013 2:42 pm
Author: stevie g
Hi guys, I'm in the process of fitting a z900/1000 tailpiece to my csr 1000 but the seat will not close because the back of the seat is straight across and does not compensate for the rounded angle of the tailpiece. Does anyone know if a Z/KZ 1000 ltd seat will go straight on my bike ? If not I suppose I'll have to flatten the back of my own. Not sure but i think I've only ever seen the KZ ltd with the tailpiece and not the UK ltd . Any suggestions guys ? thanks, $tevie
Posted: Thu Mar 14, 2013 6:14 pm
Author: nigel bessant
I have a ltd seat and a z1000 tail. I will have a look tonight but someone will surely give you the correct info.
Cheers
Nigel
Re: z1000 ltd seat dimensions
Posted: Thu Mar 14, 2013 7:31 pm
Author: Jay1969
stevie g wrote:Hi guys, I'm in the process of fitting a z900/1000 tailpiece to my csr 1000 but the seat will not close because the back of the seat is straight across and does not compensate for the rounded angle of the tailpiece. Does anyone know if a Z/KZ 1000 ltd seat will go straight on my bike ? If not I suppose I'll have to flatten the back of my own. Not sure but i think I've only ever seen the KZ ltd with the tailpiece and not the UK ltd . Any suggestions guys ? thanks, $tevie
I just bought a 1978 kZ1000 LTD B2 and it has it's original seat with the standard Z1 - z900/z1000 type of tail piece, so I hope that answers your question...can send a pic of the seat up if you like...
Re: z1000 ltd seat dimensions
Posted: Thu Mar 14, 2013 8:37 pm
Author: stevie g
Jay1969 wrote:stevie g wrote:Hi guys, I'm in the process of fitting a z900/1000 tailpiece to my csr 1000 but the seat will not close because the back of the seat is straight across and does not compensate for the rounded angle of the tailpiece. Does anyone know if a Z/KZ 1000 ltd seat will go straight on my bike ? If not I suppose I'll have to flatten the back of my own. Not sure but i think I've only ever seen the KZ ltd with the tailpiece and not the UK ltd . Any suggestions guys ? thanks, $tevie
I just bought a 1978 kZ1000 LTD B2 and it has it's original seat with the standard Z1 - z900/z1000 type of tail piece, so I hope that answers your question...can send a pic of the seat up if you like...
what is the length between the hinges till I see if one of those will fit mine,
Re: z1000 ltd seat dimensions
Posted: Thu Mar 14, 2013 9:35 pm
Author: Jay1969
stevie g wrote:Jay1969 wrote:stevie g wrote:Hi guys, I'm in the process of fitting a z900/1000 tailpiece to my csr 1000 but the seat will not close because the back of the seat is straight across and does not compensate for the rounded angle of the tailpiece. Does anyone know if a Z/KZ 1000 ltd seat will go straight on my bike ? If not I suppose I'll have to flatten the back of my own. Not sure but i think I've only ever seen the KZ ltd with the tailpiece and not the UK ltd . Any suggestions guys ? thanks, $tevie
I just bought a 1978 kZ1000 LTD B2 and it has it's original seat with the standard Z1 - z900/z1000 type of tail piece, so I hope that answers your question...can send a pic of the seat up if you like...
what is the length between the hinges till I see if one of those will fit mine,
Posted: Thu Mar 14, 2013 9:56 pm
Author: steve bowdler
oh dear that pic is going to get some response from jimmock !!
Posted: Thu Mar 14, 2013 10:04 pm
Author: Jay1969
steve bowdler wrote:oh dear that pic is going to get some response from jimmock !!
A warm welcome would be nice
