Page 1 of 1
Will a GPZ750 motor fit into a z650 frame?
Posted: Wed Feb 20, 2013 10:49 pm
Author: coldsummer
As per title, does anyone know if the GPZ750 R1 (earliest one) fit into a Z650 frame?
If the answer is yes, would the std 650 carbs be compatible dimension wise?
Cheers for any answers.
Posted: Wed Feb 20, 2013 11:08 pm
Author: KeithZ1R
Just seen one with a turbo engine in so it must be feasible
Posted: Thu Feb 21, 2013 12:38 am
Author: zed1015
All 750 motors are based on the 650, even the Zephyrs .
Carb spacing is the same.
Much like the 900/1000/1100 development they didn't change much so most engine parts are interchangable.
Posted: Thu Feb 21, 2013 2:10 pm
Author: ADRIAN H
I have seen GPZ1100 engines in Z650 frames. The way to go . .. .. .. .. ..
Posted: Thu Feb 21, 2013 5:49 pm
Author: Ginger Bear
Mmmmmm......
What have you got planned now then Simon
Posted: Thu Feb 21, 2013 6:21 pm
Author: coldsummer
Thank you gents, you are A-mazing
I'll let you know soon Steve
Posted: Thu Feb 21, 2013 9:10 pm
Author: irhobotolo
ADRIAN H wrote:I have seen GPZ1100 engines in Z650 frames. The way to go . .. .. .. .. ..
but only in a straight line ....
Posted: Thu Feb 21, 2013 9:31 pm
Author: ADRIAN H