Z1OwnersClub GB

H i All,
I wish to remove the plastic reservoir part of both front and rear master cylinders, on my GS1000, they have 2 screws in bottom and then they come off, albeit bit of pressure, how do they come off on the Z1000, I dont see any screws,
cheers

the round type are screwed in

z1bman wrote:the round type are screwed in

Do you mean the plastic part screw"s in, or held in with metal screws...

There is normally a plastic insert that sits on top of those screws.....just use a bent piece of metal, kind of hook shaped will do and then just prise/pull up the plastic insert to reveal the screws.

rear one done......

just gotta do the front one, the round insert seem not to wanna come out, but will try hooking it out....
cheers Guys.......