Page 1 of 1
z1000a1 4 f/rest-bolts..
Posted: Tue Jan 01, 2013 5:11 pm
Author: gordon62
Hi ALL,
I just wanted to ask check, before I get carried away with a big ammer
the 4 foot-rest mounting bolts that fit into each side of the frame, should they just come out tap after all nuts are removed, or are threaded in ??
Posted: Tue Jan 01, 2013 5:22 pm
Author: Steve Cooke
Threaded.
Posted: Tue Jan 01, 2013 5:47 pm
Author: ADRIAN H
Steve Cooke wrote:Threaded.
+ 1 definitely threaded.
Posted: Tue Jan 01, 2013 5:57 pm
Author: gordon62
Thanks guys, I had a feeling that was the case.......
Posted: Tue Jan 01, 2013 6:16 pm
Author: chrisu
Typically with a lock nut behind as well
Posted: Tue Jan 01, 2013 6:38 pm
Author: KeithZ1R
chrisu wrote:Typically with a lock nut behind as well
providing they were replaced
Posted: Tue Jan 01, 2013 6:44 pm
Author: chrisu
There is that......
Posted: Tue Jan 01, 2013 7:52 pm
Author: octanejunkie
They thread into a captive nut welded into the frame on my bike.
Had an outer nut shear off, so had to pop one of them out.
It took a pair of mole grips to wind it out. Thread is 10mm i think.