Page 1 of 1
Part number for the rear reflector on a Z1100 shaft
Posted: Sun Dec 30, 2012 5:30 pm
Author: Padders
Any one out there with a parts diagram that can let me have the part number for the rear reflector that bolts on to the bottom of the UK Z1100A shaft.
The parts diagram I have access to is for the american short "fender" model with no reflector.
Thanks
Posted: Sun Dec 30, 2012 7:09 pm
Author: DavidZ1R
Hi Padders, is it the same one as on the Z1R? if it is which it might be its 28012-1002, which is no longer available, however if it is the right part then the reflector off the H***a cx500 is the same part, part number 33741-415-602 can get it from David Silver spares, unless a Z1R owner has a spare
Posted: Sun Dec 30, 2012 7:10 pm
Author: Mr Puffin
Padders, høw about csml.com they list a few 1100`s but all under the kz logo
http://www.cmsnl.com/search/index.php?s ... 0&spbmvin=
Posted: Sun Dec 30, 2012 8:11 pm
Author: Padders
Cheers guys but I still cannot find the correct part number as I need the Z1100 parts diagram not the KZ1100 one with the short guard.
I will try and find a photo of the part and post it on here.
Posted: Sun Dec 30, 2012 8:58 pm
Author: tlc
Ian.
I looked in my euro spec j parts book and somewhat in helpfully it doesn't list the reflector.
I have heard that Yam FZR1000 are the same.
Posted: Sun Dec 30, 2012 9:12 pm
Author: Padders
Thanks for looking Chris.
And I thought early Z1 parts were hard to find!!!
Posted: Sun Dec 30, 2012 10:50 pm
Author: RGH
Try 28012-1005, some on FleaBay at moment.
This guy has one for sale.
Posted: Sun Dec 30, 2012 11:32 pm
Author: Padders
Thanks need the bracket as well if you find one on e bay.
Cheers