Clock backing foam.... Anyone made templates?

#1 PostAuthor: **Ginger Bear** » Thu Dec 13, 2012 8:08 pm

I am re-furbing my Z1000 A2 clocks. I have some foam which is suitable, just wondering if anyone has made templates for the four little pieces?

bunnysZ · #2 PostAuthor: **bunnysZ** » Fri Dec 14, 2012 4:42 pm

I think TLC did these once.

wilsonsjw11 · #3 PostAuthor: **wilsonsjw11** » Fri Dec 14, 2012 8:15 pm

Steve
I made a set when carrying out my 73 Z1 resto and I gave them to someone on here along with some black foam was it Perton PC :?:

Regards
Steve

tlc · #4 PostAuthor: **tlc** » Fri Dec 14, 2012 8:37 pm

Steve. I have a NOS clock bracket. (Yours FOC)

Not sure if it's gen or kawasaki style but I can supply a label.

pertonpc · #5 PostAuthor: **pertonpc** » Fri Dec 14, 2012 9:14 pm

Hi Steve,

I donated the template and foam for Z1B clock foam to someone else on here (FOC) :shock:

I may still have a template copy somewhere if no-one else has it to hand.

It is for Z1 - does 1000 A2 have the same bracket and foam?? I'm not sure.

PM me if you want me to have a hunt for the template.

If I find it you can have it posted out (FOC)

Mark

paulstrees · #6 PostAuthor: **paulstrees** » Fri Dec 14, 2012 9:16 pm

Is it genuine NOS label or replica :roll:

garyd · #7 PostAuthor: **garyd** » Fri Dec 14, 2012 9:50 pm

I wanna know if it's a NOS template...those copies are really shoddy. :??

tlc · #8 PostAuthor: **tlc** » Fri Dec 14, 2012 10:28 pm

Z1 and Z1000 are different.â€¦â€¦â€¦

labels.

pertonpc · #9 PostAuthor: **pertonpc** » Fri Dec 14, 2012 11:04 pm

Cheers Chris,

In that case Steve I ain't got the right template for you.

Sorry Mate

Z903 · #10 PostAuthor: **Z903** » Sat Dec 15, 2012 4:13 am

I have a new repro gauge mount here...can copy the shape of the foam on that if you want?

#11 PostAuthor: **Ginger Bear** » Sat Dec 15, 2012 9:43 am

Many thanks for all the offers of help. tlc is supplying me with the complete bracket, that I will use to make a template. With a bit of luck I'll be able to save it as a pdf for future reference. :roll:

KWACKERZ1 · #12 PostAuthor: **KWACKERZ1** » Sat Dec 15, 2012 6:35 pm

Gb,
I have some for a z1000 somwehere if I can find them over the weekend I'll scan them and upload a copy.

Cannot remember where I put them :oops:

#13 PostAuthor: **Ginger Bear** » Sat Dec 15, 2012 7:12 pm

That'd be great Phil. :up

KWACKERZ1 · #14 PostAuthor: **KWACKERZ1** » Sun Dec 16, 2012 10:54 am

These were made and distributed by one of the members on here! who kindly sent me a set so I cannot claim credit really.

I scanned these on an an a4 printer. Hope they help.
p.s. where did you get the foam from?

(The holes were done with a punch but not all the way through hence the raggedy holes but they are in the right place.)

#15 PostAuthor: **Ginger Bear** » Sun Dec 16, 2012 12:37 pm

Thanks Phil. If I can print that at the right size I'll be sorted.

Foam came from a small stand at Uttoxeter a couple of years ago. It's more of a self adhesive neoprene than foam, apparently good for making gaskets too. :shock:

Clock backing foam.... Anyone made templates?

Clock backing foam.... Anyone made templates?

Bracket

Who is online