Page 1 of 1
z1000j2 ...keys lost...
Posted: Tue Nov 27, 2012 2:31 pm
Author: timyoungman
I am looking for a key for a z1000 j2. The seat lock is stamped 024-0T17.
I can't find a number on the ignition barrel but I might not be looking in the right place.
Can anyone tell me if the code above is a key code and where to get a key please. Or, where to look to get the correct key code ??
Thanks
Posted: Tue Nov 27, 2012 4:12 pm
Author: z1bman
no the number you have is not the key number it should begin with Z5 **** it is stamped on the ignition switch + on the metal plate on the back of the r/h helmet lock you might need a magnifying glass to see it as it is very small. if you know the key number this company is excellent + a few members have used this company
http://www.ashfieldsecurity.co.uk/
thanks
Posted: Tue Nov 27, 2012 5:48 pm
Author: timyoungman
Thanks.
I can't read the number on the helmet hook and will need to re-examine the ignition switch...
If not it's a new lock set I need.
Posted: Tue Nov 27, 2012 6:29 pm
Author: z1bman
you will have to remove the ignition lock to see the number it is normally stamped below the main shaft of the switch either on the aluminium casing or on a steel plate around the steering lock
Found it !
Posted: Tue Nov 27, 2012 9:34 pm
Author: timyoungman
Thanks again.
I found matching numbers on all 3 locks....and have asked the locksmith you recommended...
Easy when you know how !
Cheers.
Posted: Tue Nov 27, 2012 10:21 pm
Author: z1bman
that's good news you should get the key next day
Additional info.
Posted: Wed Nov 28, 2012 1:46 pm
Author: timyoungman
Just to let you know I located another key cutter in New York who does great deals.
A key for my bike, cut to code and posted 1st class USPS cost only £12.50 at todays rate !
Here's the link for z1000j .. ..( and other Z models..)
Just type in your code and away you go.....
http://www.key-men.com/shopping/show_ke ... atnum=KA14
Posted: Wed Nov 28, 2012 5:53 pm
Author: z1bman
were are you from timyoungman?
Posted: Wed Nov 28, 2012 6:40 pm
Author: timyoungman
Perthshire,Scotland..
Posted: Wed Nov 28, 2012 6:47 pm
Author: timyoungman
Ashfield security came back to me with this message so I went for the American supplier who seems to only have 1 option for roughly the same cost..
-----Original Message-----
From: Keri
Sent: 28 November 2012 12:59
Subject: RE: Contact from ashfieldsecurity.co.uk
This code gives me two different cutting patterns. These keys would cost £7.25 each including VAT plus and extra charge of £6.00 for delivery including VAT if required.
Please e-mail back.
Regards,
James