Z1OwnersClub GB

Doe's anyone have a choke plunger lifting arm for 77b1 z 650 its the end arm that lifts the choke plunger right hand side?.
Cheers john.

Try John Browse at Wrexham if you are struggling to get one on here.
Where did yours vanish to?

Hi thanks for that the bike had been standing for a while before i bought it and the choke plunger seized when the guy lifted the lever i guess it must of just broke off, not a bad idea to keep an eye on them to make sure they dont get sticky.
cheers john.

Johno
If you can find the part number for the bit you need I will check which other models and years used it. You may find it easier to get a complete carb from a less popular model that uses the same lifter.
Pretty complete 650 carbs also come up on eBay from time to time if you keep your eye on that.

Try a pm to Crofty or Guyzed on here? they have 650 some bits.

From Mark

Do you mean the starter plunger/lever x4 of them John...part number 16068-014?

yes that sounds like them lifts the choke last one on carb 4 right hand side when your sat on the bike, been a job to start from cold guess only 3 carbs chokeing wont helping do you have any bit for sale?.
cheers john.

Hi Guyz,

Can't find the number Guy mentioned on my list.

If what you want is no. 47 on this diagram -

http://www.cmsnl.com/kawasaki-1978-kz65 ... ml#results

then it is part ref 13168-1026 called a lever, starter plunger

which came fitted to these bikes -
Model (25):
KZ1000-A1 (KZ1000) (1977)
KZ1000-A2 (KZ1000) (1978)
KZ1000-A2A (KZ1000) (1978)
KZ1000-A3 (KZ1000) (1979)
KZ1000-A3A (KZ1000) (1979)
KZ1000-A4 (KZ1000) (1980)
KZ1000-B1 (KZ1000 LTD) (1977)
KZ1000-B2 (KZ1000 LTD) (1978)
KZ1000-B3 (KZ1000 LTD) (1979)
KZ1000-B4 (LTD) (1980)
KZ1000-C1 (Police 1000) (1978)
KZ1000-C1A (Police 1000) (1978)
KZ1000-C2 (Police 1000) (1979)
KZ1000-C3 (Police 1000) (1980)
KZ1000-C4 (Police 1000) (1981)
KZ1000-D1 (Z1R) (1978)
KZ1000-D3 (Z1R) (1980)
KZ1000-E1 (Shaft) (1979)
KZ1000-E2 (Shaft) (1980)
KZ650-E1 (LTD) (1980)
KZ650-F1 (1980)
KZ650-H1 (CSR) (1981)
KZ900-A4 (1976)
KZ900-A5 (1977)
KZ900-B1 (LTD) (1976)

yeah thats great my bike is a 77 b1 but 47 looks right now all i have to do is find one!!, thanks for you help its much appreciated, i have to sell my z1 and my h2 gutted so i need to sort the b1 its a nice bike.
cheers john.

John...if the part your after is number 47, i have some on a old set of Z650 carbs...P.M. me your address and i'll send them to you.



Is it just the one you want or a full set of four

just want to say a big thanks to guyzed and you others for your help its been much appreciated should make the old b1 a bit happier on a cold morning!!!
cheers john

guy are there any meets or shows coming up?
cheers john

johno wrote:guy are there any meets or shows coming up?
cheers john

John, Looks like a few of the 'usual suspects' might be here;

http://www.z1ownersclub.co.uk/forum/vie ... hp?t=22711

sounds good to me!!![/quote]

John...the carb arm was posted this afternoon...you should get in the next day or so

thank again guy have sent you a pm
best john