Z1OwnersClub GB

Would anybody be able to tell me the size (Diameter and Pitch) of the bolt I require to remove the rotor on my Z1B as I have to investigate a noisey starter clutch. Also has anybody heard of placing a ball bearing on to the end of the crank ahead of the bolt in order to ease breaking the taper . Just to prove that I am stupid is it a right or left hand thread.

i thought the front wheel axle thread will undo it,as same thread.
could be wrong.

centre chrome steering stem nut

Alan,
Pretty sure it is M16 same as swing arm spindle & front axle.

It is right hand thread.

I have heard that the ball bearing does help.


Stu