Z1OwnersClub GB

Hi
I am looking to upgrade my front brake master cylinder set up to a more modern one
It's going on gpz750r1 twin shock
Any help or ideas would be great
Thanks

Hi there ricky...dk are doing a new twin disc master cylinder for £50 on eBay if that helps...I'll get the add number if you want it...Spence

Ricky,

Pretty much any 5/8th master cylinder will work.

If you want a remote reservoir then look for something like ZX7R, If you want an 'integral' reservoir then ZZR or ZRX will work well, but be cautious of the angle of the reservoir on some of the 'integral' stuff.
An integral resevoir designed for a sports bike, may not work well with high, 'sit up & beg' bars, just because it will hard to keep the fluid 'level'.
I hope this make's some sort of sense.

I used a Zx9r master cylinder on my kh400.The reservoir that came with it was a little bit bigger than would of liked so i got a rear reservoir from a 50cc chinese trailie.

Brilliant guys that's the info I was after I will check out eBay and see what is suitable
Many thanks

I fitted a ZRX Brake Master Cylinder as these also have the fitting for the mirror. Also as I converted my clutch to hydraulic I used the ZRX Clutch Master Cylinder.

Hi Ricky...that add number on eBay for the 5/8 master cylinder is 350612398655...Spence[/u]

Or if you want a ZRX one then i've one with lever , PM me

Thanks for finding the link z1parR...my phones not that good...Spence

Thanks again
I will go for remote res I think
Thanks for the link and offers
Any remote reservoirs with levers pm me
Thanx