JMC Swingarm Decals
Posted: Tue Oct 16, 2012 5:52 pm
Does anyone know if you can buy replacement JMC Swingarm Decals 
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://rtest.z1ownersclub.co.uk/phpBB3/
JMC Swingarm Decals
http://rtest.z1ownersclub.co.uk/phpBB3/viewtopic.php?f=4&t=22207
Page 1 of 2
Posted: Tue Oct 16, 2012 6:05 pm
Nope - but if you find a source I'll have 4
Posted: Tue Oct 16, 2012 6:18 pm
Pigford wrote:Nope - but if you find a source I'll have 4
I though you had already got some through Old School Performance
Posted: Tue Oct 16, 2012 6:28 pm
Nope - never happened 
Posted: Tue Oct 16, 2012 6:44 pm
I'd be interested in a pair too.
Might be worth giving the Image Works a shout
Might be worth giving the Image Works a shout
Posted: Tue Oct 16, 2012 6:50 pm
Graham at The Image Works should be able to help out.
He made some Davida Moto decals
He made some Davida Moto decals
Posted: Tue Oct 16, 2012 6:56 pm
I have a couple of unused ones that could be used for patterns
Posted: Tue Oct 16, 2012 7:10 pm
I will contact them tomorrow and report back with the answer !!
Posted: Tue Oct 16, 2012 7:58 pm
Well done Mike 
Posted: Tue Oct 16, 2012 8:02 pm
Give the bloke who did the shockers a call, did he leave you his card GB?
He said (via email) that he can do anything!
Vic
He said (via email) that he can do anything!
Vic
Posted: Tue Oct 16, 2012 8:11 pm
Could do with 2, if a company can be found to make them. Fingers crossed.
Posted: Tue Oct 16, 2012 9:24 pm
Evenin' chaps,
I needed some replacement Metmachex stickers when I did my z650.
There's a guy called Titch near me that runs a company called Machinery Decals.
http://www.machinerydecals.co.uk/index.html
He can copy anything yer fancy and produce it on lots of different finishes.
He's a great guy and worth a call.
Tell him Bongo with the green z650 told you about him.
Bongo.
I needed some replacement Metmachex stickers when I did my z650.
There's a guy called Titch near me that runs a company called Machinery Decals.
http://www.machinerydecals.co.uk/index.html
He can copy anything yer fancy and produce it on lots of different finishes.
He's a great guy and worth a call.
Tell him Bongo with the green z650 told you about him.
Bongo.
Posted: Tue Oct 16, 2012 9:49 pm
Hi Chaps, I'm having some decals made,( not for kawasaki) but will pop up tomorow and see what he came up with. As he did some decals for my tank, and they came out fab. I need some photo's of what you guy's need.
Posted: Wed Oct 17, 2012 3:34 pm
I also design and supply decals….
They look simple enough to make. Are they chrome and red vinyl?
I could easily make them in a jiffy.
I see there are plenty of ‘leads’ as to where to get them made, but what we all need here is to decide 100% who is to make them. i.e. one supplier only.
Like I said, if you want me to make them I will no problem.
If Mark Tiller posts the originals to me, they will be returned with a set of free decals.
Obviously I will make them for as little as I can.
PM me if I can help.
Regards, Will.
They look simple enough to make. Are they chrome and red vinyl?
I could easily make them in a jiffy.
I see there are plenty of ‘leads’ as to where to get them made, but what we all need here is to decide 100% who is to make them. i.e. one supplier only.
Like I said, if you want me to make them I will no problem.
If Mark Tiller posts the originals to me, they will be returned with a set of free decals.
Obviously I will make them for as little as I can.
PM me if I can help.
Regards, Will.
Posted: Wed Oct 17, 2012 3:47 pm
I pulled one of the old stickers off my swingarm and they are actually a clear sticker with the print on that. I thought originally they were printed on a silver backing.
We wil just need to decide the pattern as mine just say JMC but some say JMC with alloy inside the C. That can be seen on GB's post on his bike build.
Maybe Mark could send you his to get them correct ?
I did have a reply from the Image Works just saying that they could do them but would need a sample etc etc.
Probably best to keep it in the club ?
We wil just need to decide the pattern as mine just say JMC but some say JMC with alloy inside the C. That can be seen on GB's post on his bike build.
Maybe Mark could send you his to get them correct ?
I did have a reply from the Image Works just saying that they could do them but would need a sample etc etc.
Probably best to keep it in the club ?