Page 1 of 1
starter solenoid
Posted: Tue Oct 09, 2012 4:42 pm
Author: bunnysZ
if someone was to remove a starter solenoid from a bike (not a zed) and then forgot which wire went onto the left side and which wire went onto the right side of the solenoid and then onto the battery ,
would it matter which side you connected the cables to the solenoid
Posted: Tue Oct 09, 2012 5:38 pm
Author: z1bman
wouldn't make any difference which way round they are
Posted: Tue Oct 09, 2012 6:29 pm
Author: KeithZ1R
its only a switch
Posted: Wed Oct 10, 2012 8:20 am
Author: Mr Puffin
they tend not to be marked positive negative so i would say not a problem
Posted: Wed Oct 10, 2012 8:30 am
Author: Garn 1
Just a thought, if you are talking about the two small leads that go in to the solenoid coil, they must have polarity as the direct current causes the centre slug to move up or down, within the coil!
The larger connections can be changed over as said before, its just a switch!
RegardZ.
Posted: Wed Oct 10, 2012 9:33 am
Author: Taffus