Z1OwnersClub GB

Which Kawasaki Z1000, or Z1100 had an electronic rev counter, which I could make fit a Z1000A2 ?
I have a Z1000A2, which has a Z1000J head on, but the head does not have a tacho drive take off.

I have fitted an electronic rev counter from Z Power fitted, but the needle fell off after 1000 miles. Got a replacement and this did the same.

Thanks in advance for any assistance.

ADRIAN H wrote:
I have fitted an electronic rev counter from Z Power fitted, but the needle fell off after 1000 miles. Got a replacement and this did the same.

Thanks in advance for any assistance.

must be made at the same place as them exhausts paul m got

I saw one of these the other night on a z650 and the needle had snapped in half it was still working though.

does it have to be a Kawasaki one ??

If not:

http://www.scitsu.co.uk/docs/features.htm

i think all models from the z1000j1 to gpz1100 have electronic tachometers + an alternative would be the zephyr 1100 or the zephyr 750

http://www.ebay.co.uk/itm/Kawasaki-Zeph ... 500wt_1288

The Scitsu clocks and the Zephyr clocks both look interesting.
I will give Scitsu a bell tomorrow,

z650freak wrote:I saw one of these the other night on a z650 and the needle had snapped in half it was still working though.

The whole needle has come off completely.