Page 1 of 1
Frame finishers and painting in SE
Posted: Tue Sep 11, 2012 10:15 am
Author: Royalratch
The time has come!
I've found a few places to strip, powder-coat my frame and swingarm but they are just rough Google results.
Any recommends or tips?
I'm mainly interested in whether there should be a first coat of zinc primer for extra rust protection and also if it's worth any 'internal coatings' as well - or just run some oil around inside.
Much appreciated.
Posted: Tue Sep 11, 2012 11:37 am
Author: Ginger Bear
R D Cox & son in Reading have always had good reviews, for powdercoat & paint.
Posted: Thu Sep 13, 2012 8:45 am
Author: bedlow1
hello
I have have used the following with good results
Eltec at uxbridge 0845 8721825
Swallow at windsor 01753 866211
www.swallowsprays.co.uk (used them 1st time last week as cox to busy only took a week)
R D Cox at reading 0118 9750289
Posted: Thu Sep 13, 2012 4:56 pm
Author: Royalratch
Cheers lads.
But what do you think about think about extra coatings and internal protection etc...?
Posted: Thu Sep 13, 2012 5:50 pm
Author: bedlow1
Never bothered myself so can't enlighten.
Frame finishers and painting in SE
Posted: Thu Sep 13, 2012 7:00 pm
Author: HARRY4448
For blasting and powder coating try Microblast in Windsor.
Ask for Alan,the boss, who is a top bloke, good prices and quick.
If you drop parts on a Monday and were to tell him you need them by Wednesday (not too much pressure there) he'll get them done.
Highly recommended.
Posted: Thu Sep 13, 2012 8:22 pm
Author: bedlow1
That's the same place as swallows think their all in
Collusion together.
Frame finishers and painting in SE
Posted: Thu Sep 13, 2012 9:54 pm
Author: HARRY4448
Thats correct.
I always deal with Alan, who runs Microblast.
Both companies are at the same location.
Posted: Thu Sep 27, 2012 3:45 pm
Author: Royalratch
Cheers lads.
Its off to a place near Wimborne - also sorting some anodizing for me as well.