750H2 Front Caliper Piston
Posted: Fri Aug 24, 2012 7:10 pm
Does anyone know wher I can buy a replacement front brake caliper piston an 750H2? Can't seem to find it on Z1 enterprise or ZedPower site 
Ta Mike
Ta Mike
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://rtest.z1ownersclub.co.uk/phpBB3/
750H2 Front Caliper Piston
http://rtest.z1ownersclub.co.uk/phpBB3/viewtopic.php?f=4&t=21374
Page 1 of 1
Posted: Fri Aug 24, 2012 7:27 pm
A phone call to either company could reveal the parts Mike as they don't always list everything on their sites
Posted: Fri Aug 24, 2012 7:43 pm
Hi Mike,
Looked at H2C listing - think 4304-8001 is the one you need.
I got some new ones with seals that measure 42.79mm diam and 40.05mm tall
They are equivalent to 4304-8009 - Z650, 900, 1000 etc.
Drop me a pm if one of these might help you.
From Mark
Looked at H2C listing - think 4304-8001 is the one you need.
I got some new ones with seals that measure 42.79mm diam and 40.05mm tall
They are equivalent to 4304-8009 - Z650, 900, 1000 etc.
Drop me a pm if one of these might help you.
From Mark
Posted: Fri Aug 24, 2012 7:44 pm
Posted: Fri Aug 24, 2012 8:00 pm
pertonpc wrote:Hi Mike,
Looked at H2C listing - think 4304-8001 is the one you need.
I got some new ones with seals that measure 42.79mm diam and 40.05mm tall
They are equivalent to 4304-8009 - Z650, 900, 1000 etc.
Drop me a pm if one of these might help you.
From Mark
Mark,
I'll go and check its dimensions, I know they are smaller OD than z1. Be in touch soon.
Cheers, Mike
Posted: Fri Aug 24, 2012 8:00 pm
Posted: Fri Aug 24, 2012 8:43 pm
Kas750
That's the one I've just measured it at 38.12mm OD and 34.05 H.
Cheers, Mike
That's the one
I've just measured it at 38.12mm OD and 34.05 H.
Cheers, Mike
Z1 Front Caliper Pistons
Posted: Sat Aug 25, 2012 9:44 am
Has anyone remanufactured Z1 caliper pistons and got a few spare? £45 seems a tad excessive for a bit of turned bar with a counterbore.
I'm looking for 3 pistons 42.8mm OD x 34.00 H
I'm off to visit a guy in Milton Keynes this afternoon with a view to buying a restored Myford Super 7 lathe, might take a while to convince the missus I need one:D
Mike
I'm looking for 3 pistons 42.8mm OD x 34.00 H
I'm off to visit a guy in Milton Keynes this afternoon with a view to buying a restored Myford Super 7 lathe, might take a while to convince the missus I need one:D
Mike
Re: Z1 Front Caliper Pistons
Posted: Sat Aug 25, 2012 11:36 am
DogsbolloxofZ1B wrote:Has anyone remanufactured Z1 caliper pistons and got a few spare? £45 seems a tad excessive for a bit of turned bar with a counterbore.
I'm looking for 3 pistons 42.8mm OD x 34.00 H
I'm off to visit a guy in Milton Keynes this afternoon with a view to buying a restored Myford Super 7 lathe, might take a while to convince the missus I need one:D
Mike
Just buy her a pair of shoes out of Matalan.
Thats what I do, works a treat EVERY time!!!
Posted: Sat Aug 25, 2012 11:40 am
Stainless pistons.
That is the way to go.
Buy them / make them ONCE!!!!
That is the way to go.
Buy them / make them ONCE!!!!