Page 1 of 1
z1000j - gpz1100b grab rail
Posted: Sat Jul 28, 2012 4:19 pm
Author: j.b
are the grab rails for these bikes a little different?
the one i have fits short of the shock mounts on my 1100B2...should have checked it before powder coating
Posted: Sat Jul 28, 2012 5:15 pm
Author: Al
Dont know the answer sorry, but the dimension from the centreline of the 8mm bolt to the back of the throat of the clevis is 195 mm as the crow fly's on the one fitted to my J1 and it looks exactly the same as the one in youre pictures, except of course it lines up as needed.
AL
Posted: Sat Jul 28, 2012 6:10 pm
Author: z1bman
the GPZ 750 R1 has the shorter grab rail + looks identical to GPZ 1100 B1 / B2
Posted: Mon Jul 30, 2012 10:33 am
Author: j.b
Cheers guyz...
Posted: Mon Jul 30, 2012 12:19 pm
Author: Big Fluff
John.. You're welcome to pop over and have a look at mine that's fitted to my J, which is off a GPz1100B. Mine lines up okay.
Will
Posted: Mon Jul 30, 2012 6:54 pm
Author: steve.w
z1bman wrote:the GPZ 750 R1 has the shorter grab rail + looks identical to GPZ 1100 B1 / B2
agreed itl be a 750 one
