Page 1 of 1
Posted: Sun May 07, 2006 7:27 pm
Author: anthony
I'm thinking off replacing the plug leads on my 78 Z1000, it is fitted with an electronic ignition unit and Accell coils.The leads attach to the coils by means of a spark plug type fitting,is this right.If so what make off plug lead do I need to get and where from? Any ideas Guys.....
Posted: Mon May 08, 2006 8:03 am
Author: Rich
Just nice normal copper cored stuff from the car accessory shops will do you fine, unless you want to splash out on some flash Taylor leads.
Posted: Mon May 08, 2006 5:26 pm
Author: Jon
Taylor leads are bloody good, and never had a problem with water ingress or nowt.
Posted: Mon May 08, 2006 6:46 pm
Author: anthony
How do taylor leads fix onto the coils,the leads fitted on the bike have a plug cap on either end,a small 90 degree on the coil end and a straight plug cap on the other,any ideas