Z1OwnersClub GB

Posted: **Mon Jul 09, 2012 7:14 pm**

hi guys ,i am trying to get the swinging arm off,it's all unbolted etc but seems tight between the frame, any ideas before the large bar comes out.
thanks
andy

Posted: **Mon Jul 09, 2012 8:07 pm**

I had to cut the swinging arm out of my GPz750, the inner sleeve had nicely attached itself to the bolt with a fair amount of rust.

Posted: **Mon Jul 09, 2012 8:23 pm**

slacken of the rear engine bolts + it should fall out

Posted: **Mon Jul 09, 2012 9:00 pm**

hi guys thanks, after a bit of thought a managed to splay the frame a baw hair with a wooden wedge enough to get the arm out.
cheers
andy

Posted: **Fri Jul 13, 2012 7:21 pm**

you won't get it back in without loosening the rear engine mount.

Posted: **Fri Jul 13, 2012 8:54 pm**

thanks for the tip bgb , its getting a refurb first,so hopefully be in for next weekend.
cheers
andy.

Z1OwnersClub GB

swinging arm gpz1100b2.

swinging arm gpz1100b2.

b2 swinging arm

b2