Page 1 of 1
any idea how to run a z1 speedo without a speedo drive wheel
Posted: Sun Jun 03, 2012 7:18 pm
Author: floydsz1
As im putting my z1000j/gpz 1100 race project on the road i am fitting z1 clocks. I will use the electronic type of rev counter but the front wheel is one of my spare gsxr1000 ones which does'nt have a speedo drive.
any ideas how i can still use the z1 speedo.
Posted: Sun Jun 03, 2012 8:10 pm
Author: zed1015
You will still need a mechanical drive of the right ratio unless you fit an electronic speedo into the casing.
I would find a way to modify the wheel to take the mecanical speedo drive or just fit another wheel.
Posted: Mon Jun 04, 2012 7:11 pm
Author: morten
You can install a convertion kit to the outgoing axle in centre of the sprox.
Have a look at webike homepage. Very nice made kit
Posted: Tue Jun 05, 2012 6:09 am
Author: nanno
Otherwise, just fit a IIRC Bandit speedo-drive to the GSXR-wheel (as the gear should still be there).
Cheers,
Greg
Posted: Fri Jun 08, 2012 12:50 pm
Author: Rich
put a push bike speedo on it.
Posted: Fri Jun 08, 2012 6:08 pm
Author: ZedHead
Rich wrote:put a push bike speedo on it.
or clacky playing cards to the spokes
