Lots of loose wadding fell out in bits so suggestions please for a suitable replacement for same it looks and feels like glass fibre 
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Kerker baffle
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Kerker baffle
Finaly extracted the baffle out of the Kerker after some musing and head scratching oh and a lot of swearing . it finaly relinquished its hold after being persuaded from the header end with a metre length of 25mm round bar and some gravity tapping Lots of loose wadding fell out in bits so suggestions please for a suitable replacement for same it looks and feels like glass fibre
Lots of loose wadding fell out in bits so suggestions please for a suitable replacement for same it looks and feels like glass fibre Keith
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
-
davy thomson
- ZedHead
- Posts: 1000
- Joined: 24th Aug 2005
- Location: scotland [north]
You can get the wadding from any Moto x dealer Keith, I used it on my pipe.http://www.ebay.co.uk/itm/Exhaust-Waddi ... 3f163e7c8b
1000 posts reached that will do for me,over and out.been fun.
-
steve bowdler
- Area Rep.
- Posts: 1793
- Joined: 20th Apr 2005
- Location: swansea s.wales
. I luuuv this club
or you could try
http://www.thermalvelocity.co.uk/
Clever packing that comes flat (so it's easy to fit) and then expands when hot (the threads holding the quilt together melt) to fill the can. There's a calculator on the site where you fill in the dimensions of your silencer and it tells you how much you need to put in.
Not tried it yet but I ordered a load yesterday and hoping it turns up quickly as my Millie was measured at 103dB and I'm hoping to take her to Snett on Tuesday where the limit's 102
http://www.thermalvelocity.co.uk/
Clever packing that comes flat (so it's easy to fit) and then expands when hot (the threads holding the quilt together melt) to fill the can. There's a calculator on the site where you fill in the dimensions of your silencer and it tells you how much you need to put in.
Not tried it yet but I ordered a load yesterday and hoping it turns up quickly as my Millie was measured at 103dB and I'm hoping to take her to Snett on Tuesday where the limit's 102
Who is online
Users browsing this forum: No registered users and 95 guests