Page 1 of 1
Rubbers required
Posted: Thu Apr 19, 2012 7:25 pm
Author: Z1B
Is there a site anywhere that does all the many rubbers required for the Zed, need just about everything imaginable that goes onto the frame, Tank rubbers, battery box etc, anyone know where or who .
Posted: Thu Apr 19, 2012 7:59 pm
Author: z1bman
z power is probably your first option
Posted: Thu Apr 19, 2012 8:02 pm
Author: Steve Cooke
Z-Power and Z1 Enterprises both sell the majority of rubbers needed.
Posted: Thu Apr 19, 2012 8:36 pm
Author: Bill Newman
Speaking from recent experience, Zpower and Z1 Enterprises do all the rubbers - often in sets eg for the rear fender, the electrics plate, the footrest mounts, the instument panel mounts etc etc; they even do the 10mm grommet on the rear fender which the rear loom passes through.
The only rubber I have not been able to source is the special with the shaped metal insert for the horn mount(horn to bracket)
But keep an eye on the cost - I have had to renew every rubber on my A4 due to excessive perishing and its not cheap...
Posted: Thu Apr 19, 2012 9:48 pm
Author: Crofty
Z1B, Z power would be a good start as they are based in UK, then Z1 ent in US.
Bill, I have a rubber mount off a horn that was on a 650, I will send you a PM with a photo, if its the same you can have it. R U going to the Yorkshire rally again?, Crofty
Posted: Thu Apr 19, 2012 10:47 pm
Author: Bill Newman
Crofty wrote:Z1B, Z power would be a good start as they are based in UK, then Z1 ent in US.
Bill, I have a rubber mount off a horn that was on a 650, I will send you a PM with a photo, if its the same you can have it. R U going to the Yorkshire rally again?, Crofty
Yes mate - pm sent